CP Titanium Coiled Wire and Alloy Wire - GR1, GR2, GR5, Ti6Al4V from China Factory Suppliers
Products Details
Industrial titanium wire is one of ProX Metal's core products. The chemical, power and offshore industries are subjected to the harsh challenges of severe corrosion, high temperature, high pressure and complex media for long periods of time, and traditional materials (such as stainless steel and copper alloy) are highly susceptible to corrosion failure, resulting in shortened equipment life, soaring maintenance costs and even potential safety hazards.
The industrial titanium wire produced by our company has become a revolutionary material to break the bottleneck in the industry due to its super corrosion resistance, light weight, high strength and long service life, helping enterprises to reduce costs, increase efficiency and achieve sustainable development.
Common Grades and Metal Properties
High plasticity, cost effective and preferred, suitable for most chemical and seawater environments.
Strength > 900MPa. Ideal for deep-sea high-pressure, high-stress parts.
Titanium-palladium alloy wire, resistant to concentrated hydrochloric acid and sulphuric acid, specially designed for strong acid working conditions.
Titanium wires for chemical and energy industry and offshore applications
Materials Properties For Energy industry application
Resistance to extremely corrosive environments
- Dense oxide film TiO2 on the surface automatically repair, resistance to scouring corrosion and stress corrosion cracking.
- In hydrochloric acid, sulfuric acid, nitric acid and other strong acids (concentration ≤ 40%), high-temperature alkaline solution, chloride ions (Cl-) environment, titanium wire annual corrosion rate of <0.01mm, life of stainless steel more than 10 times.
High temperature and pressure stability
- Withstand temperature range -250°C~600°C, suitable for high temperature reactor lining, heat exchanger coil and other key components.
- Tensile strength ≥800MPa (Gr5 titanium alloy wire), excellent performance in high pressure pipe seals, valve springs.
Light weight and energy saving
- The density is only 57% of stainless steel, which greatly reduces the load on the equipment, reduces the cost of the support structure and improves the heat exchange efficiency.
Typical Application for Energy industry
| Equipment/parts | Titanium wire applications | Support for the project |
|---|---|---|
| Chemical reaction vessel | Braided anti-corrosion filters, stirrer reinforcement wires | Reduces production downtime due to corrosion, reducing annual maintenance costs by 50%. |
| Heat exchanger | Coil winding, tube sheet fixing wires. | Increases heat transfer efficiency by 20%, extending service life to over 15 years. |
| Flue gas desulphurisation system | Scrubber tower packing support wires, mist eliminator frame. | Resistant to SO2, Cl- corrosion, equipment replacement cycle 3 times longer. |
| Electrolysis tank | Electrode connecting wires, membrane frame binding wires. | Zero hydrogen embrittlement, ensuring stability of the electrolysis process. |
The comprehensive protection and core strengths of titanium wire in the marine industry
Corrosion resistance of titanium wire in marine environment
- In seawater with high salt content, microorganisms, marine atmosphere and seabed sediments, the corrosion rate of titanium wire is almost 0, no need for additional coating protection.
- Resistant to pitting corrosion, crevice corrosion, electrochemical corrosion, completely solving the problem of "rust pollution" of stainless steel.
Adaptability of titanium wire under high pressure in deep sea
- Titanium wire still maintains high strength and toughness under high pressure environment in 6000m deep sea, suitable for structural components of deep sea exploration cable, ROV (remotely operated vehicle).
Titanium wire anti-bio-adhesion properties
- Smooth and non-toxic surface inhibits algae and mussel adhesion, reducing maintenance frequency and operating costs.
Typical Application for marine industry
| Equipment/parts | Titanium wire applications | Support for the project |
|---|---|---|
| Desalination Plant | Reverse osmosis membrane stack binding wire, high pressure pump sealing wire. | Resistance to Cl- corrosion, improved water purity and 15% lower energy consumption. |
| Offshore platforms | Cable core material, corrosion protection net, sensor wire. | Life expectancy of over 30 years, total cost of ownership 40% lower than stainless steel. |
| Subsea pipelines | Temperature layer fixing wire, flange connectors. | Eliminates environmental and economic losses due to corrosion and leakage. |
| Shipbuilding | Hull welding wire, propeller protection net, seawater pipe fasteners. | 30% weight reduction, increased speed and optimised fuel efficiency. |
ProX Metal specialises in acid resistant titanium wire cladding technology for the chemical and energy industries and custom deep sea pressure resistant wire for offshore projects. We provide corrosion environment suitability analysis and corrosion testing recommendations for our customers.
Contact us today to begin the era of zero corrosion and we look forward to providing samples for your project.
View All Titanium Products
Frequently Asked Questions
We produce Gr2 pure titanium wire (highly plastic and cost-effective, ideal for most chemical and seawater environments), Gr5 titanium alloy wire (high strength >900MPa, ideal for deep-sea high-pressure and high-stress parts), and Gr7 titanium wire (titanium-palladium alloy wire, specially designed for strong acid conditions such as concentrated hydrochloric and sulphuric acids).
Our titanium wire features a dense, self-repairing TiO2 surface oxide film that resists scouring corrosion and stress corrosion cracking. In environments with strong acids (concentration ≤ 40%), high-temperature alkaline solutions, or chloride ions (Cl-), it exhibits an annual corrosion rate of <0.01mm, lasting over 10 times longer than stainless steel.
Yes, our titanium wire remains stable across a temperature range of -250°C to 600°C, making it suitable for reactor linings and heat exchanger coils. Additionally, Gr5 titanium alloy wire features a tensile strength of ≥800MPa, performing exceptionally well in high-pressure pipe seals and valve springs.
In marine environments, the corrosion rate of our titanium wire is almost 0, eliminating the need for protective coatings. It maintains high strength and toughness even at 6000m deep-sea pressures, resists pitting/crevice/electrochemical corrosion, and features a smooth, non-toxic surface that prevents algae and mussel adhesion.
ProX Metal specializes in acid-resistant titanium wire cladding technology and custom deep-sea pressure-resistant wire. We also provide suitability analysis for corrosive environments, offer corrosion testing recommendations, and can supply samples for your specific projects.