Leave Your Message
High-performance titanium foil solutions tailored for Iraq's demanding industrial environments
GR5 titanium foil — the most widely used titanium alloy globally — delivers an exceptional strength-to-weight ratio, outstanding corrosion resistance in aggressive chloride and sulfide environments, and reliable performance at elevated temperatures. For Iraq's booming oil & gas sector, petrochemical plants, and infrastructure modernization programs, GR5 Ti foil represents an indispensable advanced material enabling longer equipment lifespans, reduced maintenance costs, and compliance with international engineering standards.
Understanding the commercial and industrial context driving GR5 Ti foil adoption across Iraq
Iraq holds the world's fifth-largest proven oil reserves. With output targets exceeding 6 million barrels per day by 2027, upstream and midstream operators in Basra, Kirkuk, and the Kurdistan Region are investing heavily in corrosion-resistant materials. GR5 Ti foil is increasingly specified for heat exchangers, separator internals, and instrumentation components where H₂S and chloride exposure demands superior alloy performance.
Iraq's Ministry of Oil is expanding domestic refining capacity at Baiji, Basra, and Nasiriyah. New refinery units and petrochemical complexes require advanced materials for reactor linings, distillation column internals, and corrosion barriers. GR5 titanium foil's resistance to sulfuric acid and high-temperature oxidation makes it a preferred choice for Iraqi refinery engineering contractors and EPC firms.
Iraq faces chronic freshwater scarcity, driving significant investment in desalination infrastructure along the Gulf coast and the Shatt al-Arab waterway. GR5 Ti foil is used in multi-effect distillation (MED) and reverse osmosis (RO) plant components, offering decades of reliable service in highly saline and brackish water environments without the degradation seen in stainless steel alternatives.
Iraq's electricity generation deficit — a persistent challenge affecting industrial productivity — is being addressed through new thermal power stations and combined-cycle gas turbine plants. GR5 titanium foil components are used in condenser tube sheets, steam turbine blading, and heat recovery systems, providing superior fatigue resistance and longevity in high-temperature steam environments.
Iraq's Umm Qasr and Khor al-Zubair ports are undergoing significant expansion to handle growing commodity trade. Marine structures, offshore platforms, and coastal industrial facilities require titanium components that withstand continuous saltwater exposure. GR5 Ti foil's exceptional seawater corrosion resistance eliminates the need for cathodic protection systems, reducing long-term maintenance expenditure.
Iraq's defense modernization program and growing civil aviation sector are creating demand for aerospace-grade titanium materials. GR5 Ti-6Al-4V foil — the standard alloy for aircraft structural components — is procured by Iraqi MRO facilities, defense contractors, and aerospace parts manufacturers supplying regional markets from Baghdad's industrial zones.
Key market dynamics shaping the future of titanium foil procurement and application in Iraq
The Iraqi titanium materials market is entering a phase of accelerated growth, underpinned by massive public and private sector capital expenditure across energy, infrastructure, and manufacturing sectors. International engineering firms operating in Iraq — including South Korean, Chinese, Italian, and American EPC contractors — are specifying titanium alloy materials at unprecedented rates in their project bills of materials.
The Iraqi government's National Development Plan allocates over $150 billion USD toward infrastructure and industrial development through 2030. This creates substantial, sustained demand for high-performance materials including GR5 titanium foil across dozens of concurrent megaprojects.
Barrels per day by 2027 — driving massive upstream Ti material demand
National Development Plan 2024–2030 capital expenditure
Ultra-thin to 3mm+ available for Iraq's diverse industrial applications
Specific use cases and deployment scenarios for GR5 titanium foil across Iraqi industries
GR5 Ti foil is fabricated into heat exchanger plates and gaskets for crude oil processing facilities in Basra's supergiant fields — West Qurna, Rumaila, and Zubair. The alloy's resistance to H₂S and brine prevents the fouling and corrosion failures common with carbon steel alternatives.
Oil & Gas
Iraqi petrochemical plants processing chlorinated compounds and sulfuric acid derivatives use GR5 Ti foil cladding on reactor vessels and storage tank internals. The foil's electrochemical passivity in oxidizing acid environments eliminates contamination risk and extends vessel service life beyond 25 years.
Chemical
The Basra Water Authority's desalination expansion program specifies GR5 Ti foil for evaporator tube sheets and brine heater components. Titanium's zero corrosion rate in hot seawater ensures consistent water quality and eliminates the metallic contamination issues that plagued earlier copper-alloy installations.
Desalination
Expansion of Iraq's primary deep-water port at Umm Qasr incorporates GR5 Ti foil in underwater structural fasteners, sacrificial anode brackets, and seawater cooling system components. The material's proven 40+ year service life in marine environments delivers compelling lifecycle cost advantages for Iraqi port authority infrastructure budgets.
MaritimeStandard and custom specifications available for Iraq procurement and engineering projects
| Parameter | Specification | Iraq Application Note |
|---|---|---|
| Grade | GR5 / Ti-6Al-4V / Ti64 | Most specified titanium alloy in Iraqi oil & gas tenders |
| Standard | ASTM B265 / AMS 4911 | Accepted by Iraqi Ministry of Oil engineering standards |
| Thickness | 0.005mm – 3.0mm | Ultra-thin foil for electronics; thicker for structural cladding |
| Width | Up to 1,000mm (custom) | Wide format for heat exchanger plate fabrication |
| Tensile Strength | ≥ 895 MPa | Exceeds requirements for high-pressure Iraqi pipeline applications |
| Yield Strength | ≥ 828 MPa | Suitable for structural and pressure vessel applications |
| Elongation | ≥ 10% | Adequate ductility for forming and fabrication in Iraqi workshops |
| Surface Finish | Bright annealed, pickled, polished | Pickled surface preferred for corrosive Iraqi environments |
| Condition | Annealed (STA available) | Annealed standard; STA for high-strength aerospace applications |
| Certification | Mill Test Certificate (MTC), ISO 9001:2015 | Required for Iraqi government and NOC procurement compliance |
| MOQ | 1 kg (spot); custom from 5 kg | Small trial orders available for Iraqi engineering firms |
| Lead Time | 7–25 days (stock/custom) | Air freight to Baghdad/Basra available for urgent orders |
Grade: GR1, GR2 | Standard: ASTM B265
Spec: δ(0.3–12)mm × W500–2000mm × L
Surface: Cold rolled bright, pickled, hot rolled pickled, black oxide
View more
Grade: GR1, GR2 | Standard: ASTM B265
Spec: δ(0.3–100mm) × W(400–3000mm) × L(800–20,000mm)
Surface: Cold-rolled bright, acid-washed, sandblasted | Annealed
View more
Grade: GR1, GR2, GR7, GR12 | Standard: ASTM B265
Spec: δ(12–75mm) × W(1500–2500mm) × L(1000–12,000mm)
Custom request size available.
View more
Grade: Ti6Al4V, Ti6Al4V ELI, GR5, GR23 | Standard: ASTM B265
Spec: δ(0.5–75mm) × W(400–3000mm) × L(800–60,000mm)
Available on custom request.
View more
Grade: Ti-5Al-2.5Sn | Standard: ASTM B265
Spec: δ(0.5–50mm) × W(500–1500mm) × L(1000–20,000mm)
Meets customization requests.
View moreFounded in 2001, ProX Metal is a high-tech enterprise specialising in the development, production and servicing of pure and alloy titanium materials. As a leading manufacturer of raw titanium materials, we focus on providing cost-effective, stable, high-end titanium materials applied in chemical, oil and gas, marine and electronics fields. We are ISO 9001:2015 certified and hold 14 national patents.
With over two decades of global export experience, ProX Metal has established a strong track record of supplying titanium foil and sheet products to engineering firms, distributors, and government contractors operating in Iraq and the broader Middle East region. Our dedicated technical team provides material selection guidance, custom specification support, and documentation packages compliant with Iraqi NOC and international EPC contractor requirements.
ProX Metal possesses a complete titanium metal production chain, equipped with over 100 advanced machines, achieving an annual output of 8,000 tons of pure titanium and alloy materials. We offer comprehensive solutions spanning from standard products to customized offerings, committed to delivering the highest quality service to our customers.
ProX Metal is certified to ISO 9001:2015, with its quality system and product lines undergoing regular certification audits. We have implemented a rigorous quality management system that meets the stringent excellence standards for titanium raw material production, ensuring our products meet the highest safety and quality standards demanded by Iraqi industrial procurement.
We have multiple products for you to choose from — serving Iraq's key industrial sectors
In the chemical industry, it is widely used against highly corrosive media such as chlor-alkali and sulphuric acid. It ensures the efficient and safe operation of chemical production, prevents material leakage and guarantees product quality.
view more →Supplies provide the high-strength, corrosion-resistant titanium materials for exploration, production and refining oil — critical for Iraq's Basra, Kirkuk, and Kurdistan oil fields.
view more →Corrosion resistance in sea water and brackish applications make titanium the material of choice in marine applications, including Iraq's Umm Qasr and Khor al-Zubair port developments.
view more →Titanium improves efficiency and extends the life of desalination equipment due to its corrosion resistance, high strength, light weight and good thermal conductivity — vital for Iraq's water security projects.
view more →What our global clients say about ProX Metal titanium products and service
They provided a prompt update on arranging the shipment. We are very grateful that they were able to solve the problem quickly after sales, and we are confident that we will continue our collaboration for a long time.
We've been working with this supplier for 10 years, and we can't speak highly enough of them. The quality of their titanium sheets and strips is always consistent, and they always meet our production needs.
Their logistics are super fast, so they can deliver on time even for big orders. This helps us avoid production delays, which is a huge help for our Iraq project schedules.
Their comprehensive inventory meets our diverse material grade requirements, making them highly accommodating for distributors like us. They provide an efficient and patient service for sample orders, and we look forward to expanding our collaboration with them in the future.
Contact Us For Best Pricing on GR5 Titanium Foil for Iraq. Would you like to know more? We can give you the answer. For inquiries about our products, please leave your e-mail and we will reply within 24 hours.
Click for Inquiry
What makes titanium sheets ideal for chemical storage and piping applications?
Explore more →
What makes titanium sheets ideal for chemical reactor applications?
Explore more →
Choosing Between Bright Annealed (BA) and Pickled Titanium Sheets for Chemical Equipment – Extended Guide
Explore more →Complete range of titanium foil, sheet, and alloy products available for Iraqi industrial procurement
High-strength GR5 Ti64 Titanium Alloy Rods — Iraq Oil Field Supply
Premium Gr2/Gr5/Gr7 Titanium Products — Iraq Multi-grade Solutions
0.005–0.10mm Titanium Foil — Iraq Electronics & Precision Industry
Ti64 (GR5) Alloy Titanium Foil — Iraq Petrochemical Grade
Custom Widths GR1, GR2 Corrosion Resistant Titanium Foil Strips — Iraq Water Treatment
Ti6Al4V GR5 Titanium Plate with High Strength — Iraq Industrial Projects
Lightweight Corrosion-resistant Alloy Titanium Foil GR7 GR12 — Iraq Marine Use
Ti3Al2.5V Corrosion Resistant Titanium Foil — Iraq Aerospace & Defense
