Leave Your Message
The United States remains one of the world's largest consumers of titanium coil sheets, driven by robust demand across aerospace, chemical processing, oil & gas, defense, and medical device manufacturing. As a trusted wholesale titanium coil sheet supplier with over two decades of experience, ProX Metal delivers ASTM B265-compliant GR1 and GR2 titanium coil sheets directly to U.S. buyers — offering competitive pricing, reliable logistics, and custom specification fulfillment for bulk orders.
America's industrial base is undergoing a significant transformation. The push for lightweight, corrosion-resistant, and high-performance materials is intensifying across multiple sectors. Titanium coil sheets — valued for their exceptional strength-to-weight ratio, biocompatibility, and resistance to harsh chemicals and saltwater — are becoming indispensable in modern U.S. manufacturing.
From Gulf Coast petrochemical refineries in Texas and Louisiana to Pacific aerospace contractors in California and Washington State, the demand for consistent, traceable, and certifiable titanium coil stock has never been higher. Federal procurement programs, including those under the Department of Defense and NASA, further amplify domestic consumption of aerospace-grade titanium sheet materials.
GR1 & GR2 titanium coil sheets resist chlorine, acids, and saltwater — ideal for U.S. coastal and chemical plant environments.
Titanium is 45% lighter than steel yet matches its strength — reducing structural load in aerospace, marine, and transportation applications.
All products conform to ASTM B265 standards — fully traceable and accepted by U.S. procurement, quality, and regulatory systems.
| Grade | Standard | Thickness (mm) | Width (mm) | Surface Finish |
|---|---|---|---|---|
| GR1 (Commercially Pure) | ASTM B265 | 0.3 – 12 | 500 – 2000 | Cold Rolled Bright, Pickled, Hot Rolled Pickled, Black Oxide |
| GR2 (Commercially Pure) | ASTM B265 | 0.3 – 100 | 400 – 3000 | Cold Rolled Bright, Acid-Washed, Sandblasted, Annealed |
| GR7 (Ti-0.2Pd) | ASTM B265 | 0.5 – 50 | 500 – 2000 | Pickled, Bright Annealed |
| GR12 (Ti-0.3Mo-0.8Ni) | ASTM B265 | 12 – 75 | 1500 – 2500 | Hot Rolled Pickled, Custom |
Titanium coil sheets serve a broad spectrum of American industries. Here are the primary domestic application sectors driving demand in the United States:
Texas, Louisiana, and Oklahoma host some of the world's largest petrochemical complexes. Titanium coil sheets are extensively used in heat exchangers, reactor vessels, and piping systems where exposure to sulfuric acid, chlorine compounds, and high-temperature steam is constant. GR2 titanium coil stock is the preferred material for these environments due to its outstanding pitting and crevice corrosion resistance.
Companies such as Boeing, Lockheed Martin, Northrop Grumman, and their Tier 1 suppliers rely heavily on titanium sheet and coil stock for structural airframe components, engine nacelles, and fastener systems. California's Inland Empire, Wichita (Kansas), and Huntsville (Alabama) are major aerospace manufacturing hubs consuming significant volumes of ASTM B265 titanium sheet annually.
The U.S. medical device industry — led by companies in Minnesota's Medical Alley and California's Bay Area — uses GR1 and GR2 titanium coil sheets for surgical instrument trays, implant packaging, and sterilization equipment. Biocompatibility and non-magnetic properties make titanium the gold standard for medical-grade applications.
With large-scale desalination projects expanding in California, Texas, and Florida, titanium coil sheets are critical for condenser tubing, heat transfer plates, and evaporator components. Titanium's resistance to seawater corrosion ensures operational longevity and reduces maintenance costs in these capital-intensive facilities.
The U.S. Navy's shipbuilding programs at Newport News (Virginia) and Bath Iron Works (Maine) incorporate titanium sheet into submarine hull components, seawater cooling systems, and propeller shafts. The material's immunity to biofouling and seawater corrosion makes it irreplaceable in naval engineering.
The North American titanium market was valued at over $4.5 billion in 2024 and is projected to grow at a CAGR exceeding 5.8% through 2030. Several structural trends are reshaping how U.S. manufacturers source and consume titanium coil sheet:
Post-pandemic supply chain disruptions accelerated U.S. manufacturers' shift toward diversifying titanium sourcing. Many American buyers now maintain dual-sourcing strategies — partnering with both domestic and certified international wholesale suppliers — to ensure supply continuity for critical production lines.
With Boeing's 737 MAX and 787 Dreamliner production ramping up, and Airbus expanding its Mobile, Alabama assembly facility, demand for aerospace-grade titanium coil and sheet stock is projected to increase 12–15% annually through 2027, creating significant wholesale sourcing opportunities.
The U.S. Inflation Reduction Act (IRA) is driving massive investment in green hydrogen production, where titanium electrolyzer plates and coil sheets are essential. Proton exchange membrane (PEM) electrolyzers require high-purity GR1 titanium sheet — a fast-growing segment for wholesale titanium coil suppliers.
The U.S. is the world's largest exporter of medical devices. Increased FDA scrutiny on material traceability is pushing OEMs to source ASTM-certified, mill-certified titanium coil sheet with full chemical and mechanical test reports — exactly what ProX Metal provides as standard documentation.
Sourcing titanium coil sheet for the U.S. market requires more than competitive pricing. American buyers demand documentation compliance, consistent quality across batches, responsive technical support, and reliable logistics. ProX Metal addresses all these requirements:
Grade: GR1, GR2
Standards: ASTM B265
Specifications: δ(0.3-12)mm × W500-2000mm × L
Surface: Cold rolled bright, Cold rolled pickled, Hot rolled pickled, Black oxide-covered
Grade: GR1, GR2
Standards: ASTM B265
Specifications: δ(0.3-100mm) × W(400-3000mm) × L(800-20,000mm)
Surface: Cold-rolled bright, acid-washed, sandblasted
Condition: Annealed
Grade: GR1, GR2, GR7, GR12
Standards: ASTM B265
Specifications: δ(12-75mm) × W(1500-2500mm) × L(1000-12,000mm)
Custom request size available.
Grade: Ti6Al4V, Ti6Al4V ELI, GR5, GR23
Standards: ASTM B265
Specifications: δ(0.5-75mm) × W(400-3000mm) × L(800-60,000mm)
Available on custom request.
Grade: Ti-5Al-2.5Sn
Standard: ASTM B265
Specifications: δ(0.5-50mm) × W(500-1500mm) × L(1000-20,000mm)
Meet customization requests.
Grade: Grade 7 (Ti-0.2Pd)
Standards: ASTM B348
Specifications: Φ5-100mm × L2000-3000mm
Surface: Polished, Lathe Machined, Black Oxidized
Grade: GR12 (Ti-0.3Mo-0.8Ni)
Standards: ASTM B348
Specifications: Φ5-100mm × L2000-3000mm
Surface: Polished, Lathe Machined, Black Oxidized
Grade: GR5, Ti6Al4V, Ti6Al4V ELI
Standards: ASTM B348
Specifications: Φ5-100mm × L3000mm
Surface: Polished, Lathe Machined, Black Oxidized
Grade: GR1, GR2, GR3, GR4
Standards: ASTM B348
Specifications: Φ5-100mm × L3000mm
Surface: Polished, Lathe Machined, Black Oxidized
Products: Common grades GR2 / GR5
Specifications: Hex: GR2: H2.5–H7 / GR5: H14; Square: H6–18 × 6–18
Standard: ASTM B348
Surface: Polished, Lathe Machined, Black Oxidized
Material: GR9 (Ti-3Al-2.5V)
Specifications: Diameter: 6-100mm × Length: 1500-3000mm
Surface: Polished, Lathe Machined, Black Oxidized
Grade: GR1, GR2, GR5, GR7, GR12
Standards: ASTM B862
Specifications: Φ(6-200) × L(500-6000)mm
Surface: Polished, Pickled or Coated
Grade: GR1, GR2, GR5, GR7, GR12
Standards: ASTM B338, ASTM B861
Specifications: Φ(3-110) × L(500-6000)mm
Custom lengths and diameters available on request.
Material: GR1, GR2, GR5 (Ti6Al4V), GR9
Specifications: ⌀: 0.5-6mm × T: 0.1–1.2mm × L: 600–1000mm
Standard: ASTM B861, B338, B337, B862
Surface: Polished, Machined, Pickled
Founded in 2001, ProX Metal is a high-tech enterprise specialising in the development, production and servicing of pure and alloy titanium materials. As a leading manufacturer of raw titanium materials, we focus on providing cost-effective, stable, high-end titanium materials applied in chemical, oil and gas, marine and electronics fields. We are ISO 9001:2015 certified and hold 14 national patents.
ProX Metal possesses a complete titanium metal production chain, equipped with over 100 advanced machines, achieving an annual output of 8,000 tons of pure titanium and alloy materials. We offer comprehensive solutions spanning from standard products to customized offerings, committed to delivering the highest quality service to our customers.
ProX Metal is certified to ISO 9001:2015, with its quality system and product lines undergoing regular certification audits. We have implemented a rigorous quality management system that meets the stringent excellence standards for titanium raw material production, ensuring our products meet the highest safety and quality standards.
In the chemical industry, titanium is widely used against highly corrosive media such as chlor-alkali and sulphuric acid. It ensures efficient and safe chemical production, prevents material leakage and guarantees product quality.
view more →
Supplies high-strength, corrosion-resistant titanium materials for exploration, production and refining oil — critical for Gulf Coast and Permian Basin operations.
view more →
Corrosion resistance in seawater and brackish applications makes titanium the material of choice in U.S. Navy and commercial marine applications.
view more →
Titanium improves efficiency and extends the life of desalination equipment due to its corrosion resistance, high strength, light weight and good thermal conductivity — vital for California and Texas water projects.
view more →Contact us for the best titanium coil sheet pricing for the U.S. market. For inquiries about our products, please leave your e-mail and we will reply within 24 hours.
They provided a prompt update on arranging the shipment. We are very grateful that they were able to solve the problem quickly after sales, and we are confident that we will continue our collaboration for a long time.
We've been working with this supplier for 10 years, and we can't speak highly enough of them. The quality of their titanium sheets and strips is always consistent, and they always meet our production needs.
Their logistics are super fast, so they can deliver on time even for big orders. This helps us avoid production delays, which is a huge help.
Their comprehensive inventory meets our diverse material grade requirements, making them highly accommodating for distributors like us. They provide an efficient and patient service for sample orders, and we look forward to expanding our collaboration with them in the future.
What makes titanium sheets ideal for chemical storage and piping applications?
Explore more
What makes titanium sheets ideal for chemical reactor applications?
Explore more
Choosing Between Bright Annealed (BA) and Pickled Titanium Sheets for Chemical Equipment – Extended Guide
Explore more
